Home Services References Contact
 

Overview of Recommended Systems and Warranties

  Surface requiring attention

System

Process

Concrete Roofs  4mm Torch-On / Heat Welded Membrane
  • Clean and prime area
  • Fully bond by Heat Welding the 4mm Membrane to surface
  • Finish into outlets and flash to vertical walls
  • Coat with UV protective Silver

IBR / Corrugated Sheeting

 

Polyester Membrane applied to bolt heads  and lap joints
  • Clean and prepare area
  • Coat surface with either bitumen or acrylic bonding liquid
  • Lay Polyester membrane into liquid
  • Finish with UV stable final coat

IBR / Corrugated Sheeting (Flat Pitch)

Board and 4mm Torch-On / Heat Welded Membrane
  • Clean and prepare area
  • Fix boards directly to Roof Sheeting
  • Fully bond by Heat Welding the 4mm Membrane to surface
  • Finish into outlets and flash to vertical walls
  • Coat with UV protective Silver

IBR / Corrugated Sheeting (Corroded)

Re-Sheet Roof
  • Strip existing Sheeting
  • Install New Sheeting

Tiled Roofs

Replace Under Tile Plastic
  • Strip Tiles and brandering
  • Fit 250um S.A.B.S. to area and bond with polyurethane
  • Replace brandering and tiles
  • Service Valleys and Flashings

Boundary Walls

Acrylic Membrane
  • Clean and prepare area
  • Coat surface with acrylic bonding liquid
  • Lay Polyester membrane into liquid
  • Finish with UV stable final coat

   Boundary Walls

Acrylic "Fibre" Paint
  • Clean and prepare area
  • Coat surface with good quality undercoat
  • Finish with coat of Fibre Sealing Paint

Damp Proofing

Latex based System
  • Strip plaster from area to expose brickwork
  • Clean and prepare area
  • Coat bricks with slurry mix allow to dry
  • Re-Plaster area with Latex System incorporated in plaster mix
Balconies  4mm Torch-On / Heat Welded Membrane
  • Clean and prime area (to fall)
  • Fully bond by Heat Welding the 4mm Membrane to surface
  • Finish into outlets and flash to vertical walls

Balconies (Cementitious System)

Latex based System
  • Clean and prepare area (to fall)
  • Coat cement floor with slurry mix
  • Lay "Echofelt" cloth in mixture
  • Apply final coat
  • Allow to cure

Balconies (Tiled)

Polyurethane System
  • Clean and prepare area
  • Strip Grouting with diamond tip grinding disc
  • Prime grouting lines
  • Install high quality polyurethane to area
  • Allow to cure
Showers (Cementitious System) Latex based System
  • Clean and prepare area (to fall)
  • Coat cement floor with slurry mix
  • Lay "Echofelt" cloth in mixture
  • Apply final coat
  • Treat walls to shower head height with slurry
  • Allow to cure

Box Gutters

4mm Torch-On / Heat Welded Membrane
  • Clean and prime area
  • Fully bond by Heat Welding the 4mm Membrane to surface
  • Finish into outlets and flash to the vertical
  • Coat with UV protective Silver
  Fish Ponds

Rubber/Bitumen System

(Inert and water based)

  • Clean and prepare area
  • Concrete must be stable and dry
  • Apply thinned out coat to initially penetrate
  • Apply second coat
  • Lay polyester membrane in corner areas
  • Apply final coat
  • Allow to cure